And yes, you’re done shooting your Ravin crossbow finally! Center the forward end of the arrow on the arrow rest. Step8:īy sliding the safety into the fire position we will allow the Ravin crossbow to fire. Then confirm the odd colored fletching is in the down position.
If you don’t get any sound, completely remove the nock from TTFS and place it again. You will need 5lb of force to do it. Step7: Now insert the nock end of the Ravin branded arrow under the riser archway and into the center of the TTFS until it’s fully engaged with the bowstring.
The white-colored fletching must be positioned downward in the rail at the 6 o’clock position.  Next grasp your arrow directly behind the field tip. Always keep your hand forward on the strings stoppage.  Step6: Never place your hand or any of the body parts before the bolts and bowstrings. Inspect the bolts so that there are no cracks or chips present. If the nock is not properly oriented rotate the nock to the required position. Step5: The nock opening should be horizontal and perpendicular to the white cock fletching. This time make sure the nock and the white fletching are properly oriented. Look down to the length of the arrow with the white cock fletching straight down. Check if there is any splintering or cracking in the carbon shaft by flexing the arrow back and forth with your hand. Firing with broken arrows will bring serious personal injury and harm the bow as well.Īlso, look into the nocks and veins. Inspect every arrow and insert it if it’s damaged or broken. If It’s not then push it to the safe position. Step3: Now visually confirm that the safe mode is on and the white dot is noticeable.
Ravin crossbow fletching up or down how to#
How To Uncock A Crossbow (Decock) – 4 Safe And Easy WaysĪs Ravin crossbows are designed to shoot only with Ravin branded arrows, collect arrows equipped with a new orange Ravin clip on the nock.ÂĪnd point your Ravin crossbow in a safe direction when loading. Step2:
0 kommentar(er)
